December 2012Serial number 000000 and afterPart Number 104850-000MANUALOPERATORS
Controls and Indicators8 A62JRT – 104850-000Battery Disconnect SwitchThe battery disconnect is located at the right front of the turntable (refer to
Controls and IndicatorsA62JRT – 104850-000 9 • Hold the switch to the right to extend the booms. • Hold the switch to the left to retract the bo
Controls and Indicators10 A62JRT – 104850-000CautionA tripped circuit breaker indicates a malfunction in the electrical system. Component damage can
Controls and IndicatorsA62JRT – 104850-000 11 Drive Range SwitchThe drive range switch (refer to Figure 4) has two posi-tions to select drive wheel o
Pre-Operation Safety Inspection12 A62JRT – 104850-000AC Generator SwitchThe switch for the optional AC generator is located on the front of the upper
System Function InspectionA62JRT – 104850-000 13 System Function InspectionRefer to “Controls and Indicators” on page 7 for the loca-tions of various
Operation14 A62JRT – 104850-000OperationThe aerial platform may be operated from either the lower or upper controls.DangerThe aerial platform is not
OperationA62JRT – 104850-000 15 Preparing for OperationUse the following procedure to prepare the aerial platform for operation. 1. Perform a presta
Operation16 A62JRT – 104850-000Driving and SteeringDangerThe aerial platform can tip over if it becomes unstable. Death or serious injury will result
OperationA62JRT – 104850-000 17 WarningThe potential for an accident increases when safety devices do not function properly. Death or serious injury
Operation18 A62JRT – 104850-000 1. Pull the emergency stop button outward. 2. Turn the start switch on. 3. Step down on the platform foot switc
Transporting the MachineA62JRT – 104850-000 19 Transporting the MachinePreparing for TransportationUse the following procedure to prepare the aerial
Maintenance20 A62JRT – 104850-000MaintenanceWarningNever perform service while the platform is el-evated.Hydraulic FluidThe hydraulic fluid re
Inspection and Maintenance ScheduleA62JRT – 104850-000 21 Inspection and Maintenance ScheduleCautionFrequency and extent of periodic inspections may
Daily Preventative Maintenance Checklist22 A62JRT – 104850-000ITEM INSPECTION OR SERVICES Y N ROperator’s Manual In place, all pages readable and int
SpecicationsA62JRT – 104850-000 23 SpecicationsAerial PlatformWorking height 20.6 m (67′ 8″)Maximum platform height 18.8 m (61′ 8″)Up and over he
Local Distributor / Lokaler Vertiebshändler / Distributeur localEl Distribuidor local / ll Distributore localeEUROPE, MIDDLE EASTAFRICA & ASIAPHON
Table of ContentsA62JRT – 104850-000 1 Table of ContentsDeclaration of Conformity ...2Wheel Orientation Infor
2 A62JRT – 104850-000 EC Declaration of Conformity of Machinery 2006/42/ECEC-Konformitätserklärung für Maschinen 2006/42/ECDeclaration De Conformite
A62JRT – 104850-000 3 Figure 1 – Correct Wheel OrientationFigure 2 – Wheel Position DecalThe distance between the outer edge of the right wheel to th
Introduction4 A62JRT – 104850-000WarningAll personnel shall carefully read, understand and follow all safety rules and operating instructions before
IntroductionA62JRT – 104850-000 5 IntroductionThis manual covers the A62JRT Aerial Work Platform.This manual must be stored on the machine at
Special Limitations6 A62JRT – 104850-000Special LimitationsTravel with the platform raised is limited to creep speed range. Elevating the platform
Controls and IndicatorsA62JRT – 104850-000 7 11. Controls selector switch12. Ground operation switch13. Platform overload light14. Engine/emergen
Comentários a estes Manuais